IDX V-shape battery mount

[Charles King]

Does anyone know the dimensions of the distant between 'B' & 'C' in the pic below? Eugenio, do you have this dimension? Maybe dimension of the entire mount so I would know how to  make the plate. Thanks.

[eugenio barzaghi]

I'm sorry but i don't have B a C distances for an ID-X cause my V-mount plates are from Anton Bauer and the mounting screws have different postions, but tomorrow I'll give you the mine,ok?

[Charles King]

Ok. I will also like a pic of your V mount please.

[eugenio barzaghi]

ok

[Charles King]

Eugenio, does your V mount look like this:

[eugenio barzaghi]

No Charles, it's a bit different.
my V-mount plate is exactly this: http://cgi.ebay.it/V-Mount-V-Lock-Platte-mit-Powertap-Anschluss_W0QQitemZ150373949772QQcmdZViewItemQQptZFilmnachbearbeitung?hash=item2302fc614c&_trksid=p3286.m63.l1177

[Charles King]

Ok. If you can measure the mounting screws center to center I would appreciate it. It seems the plate can be mounted with four screws. The size of the screws would be nice to know too.

[Vladimir Korshunov]

Hi Charles!
May be it will help You somehow. My V-lock is slightly different, but anyway:

A = 92 mm,  B = 55 mm,  screws OD = 3 mm

[eugenio barzaghi]

Thank you Vladimir, exactly the same dimensions of my V-mount, screws included!

[Charles King]

thank you Vladimir. I appreciate it very much.

[Charles King]

May I ask the difference in performance with the V-mount I've post on a dual mount plate and the one you posted, Vladimir? I see the one you posted seems to be smaller than the one I posted. It would be nice to know the measurements of the second V-mount on the dual mount plated I posted, as to make my dual mount compatible with the two. So if anyone has one or know of the schematics of the mounting holes please let me know. Thanks.